柔性接头有效摆心漂移特性

设计了带缠裹式防热套的柔性接头,弹性件和防热套材料均采用硅橡胶.研究了柔性接头有效摆心和几何球心的关系,采用2阶四项式Mooney-Rivlin模型模拟弹性件的本构关系,利用ANSYS软件分别仿真计算柔性接头在压强为0,9MPa下不同摆角条件的有效摆心和几何球心漂移,得到了两者的漂移包络线,把仿真的有效摆心漂移结果与试验测量值进行比较,并利用间隙碰撞试验验证了几何球心漂移仿真结果的准确性,在此基础上研究了有效摆心漂移的原因.结果表明:摆心包络线的仿真结果与试验结果吻合较好,有效摆心和几何球心是两个不同的概念,柔性接头的有效摆心漂移在半径为2.5mm,高为1.4mm的圆柱包络面内,而几何球心的漂移在半径为0.013mm,高为0.6mm的圆柱包络面内,有效摆心漂移是由接头各层增强件和弹性件的变形不同引起的.      

Effects of uncertainties and flexible dynamic contributions on the control of a spacecraft full-coupled model

One of the most important problems for performing a good design of the spacecraft attitude control law is connected to its robustness when some uncertainty parameters are present on the inertial and/or on the elastic characteristics of a satellite. These uncertainties are generally intrinsic on the modeling of complex structures and in the case of large flexible structures they can be also attributed to secondary effects associated to the elasticity. One of the most interesting issues in modeling large flexible space structures is associated to the evaluation of the inertia tensor which in general depends not only on the geometric ‘fixed’ characteristic of the satellite but also on its elastic displacements which of course in turn modify the ‘shape’ of the satellite. Usually these terms can be considered of a second order of magnitude if compared with the ones associated to the rigid part of a structure. However the increasing demand on the dimension of satellites due to the presence for instance of very large solar arrays (necessary to generate power) and/or large antennas has the necessity to investigate their effects on their global dynamic behavior in more details as a consequence. In the present paper a methodology based on classical Lagrangian approach coupled with a standard Finite Element tool has been used to derive the full dynamic equations of an orbiting flexible satellite under the actions of gravity, gravity gradient forces and attitude control. A particular attention has been paid to the study of the effects of flexibility on the inertial terms of the spacecraft which, as well known, influence its attitude dynamic behavior. Furthermore the effects of the attitude control authority and its robustness to the uncertainties on inertial and elastic parameters has been investigated and discussed.     

基于CFD/CSD方法的蜻蜓柔性翼气动特性分析

给出了一种基于计算流体力学/计算结构力学（CFD/CSD）的双向流固耦合方法.通过交替数字二叉树（ADT）搜索技术识别流固网格之间的宿主-受体关系.采用局部插值算法完成两套网格系统之间的数据交换,并使用Delaunay图映射方法来完成气动网格的移动.将自编的非线性结构有限元程序、接口程序与南京航空航天大学（NUAA）微型飞行器中心的流体计算程序3D2MUFS相连接,应用于蜻蜓柔性翼拍动飞行的气动计算中.计算结果表明:柔性变形使得蜻蜓翼的时均举力系数从0.31提高到0.53,时均推力系数从0.07提高到0.13,证实了柔性变形能改善扑翼的气动性能.      

压电自适应桁架结构主动控制模型及实验

为提高结构对外部环境的抗干扰能力,构造了压电柔性自适应桁架结构,并对其主动控制进行了研究.由传感器、作动器与柔性梁组成压电自适应桁架结构.基于自适应结构的机电耦合理论,在测量位移的情况下,采用改进的二次积分力反馈控制方法研究了空间压电柔性自适应桁架结构的振动主动控制问题.建立了压电柔性自适应桁架结构主动控制实验系统,并对这类自适应结构进行了实时计算机振动主动控制实验研究.实验研究表明柔性自适应桁架结构能够改善结构的动力学特性,对外界的干扰具有良好的自适应性.     

可变后缘弯度机翼柔性蒙皮的变形特性分析

应用面元法和有限法建立了柔性蒙皮在气动载荷作用下的流固耦合分析方法。数值仿真结果表明:位于变形后缘上表面的柔性蒙皮在气动载荷作用下将被"吸"成鼓包形状,且这个局部变形对翼型后缘部分的压力分布具有很大影响。在此基础上,研究了柔性蒙皮在气动载荷作用下的变形随其弹性模量、厚度和初始预应变的变化规律。可以得出,柔性蒙皮的变形量随着翼型后缘偏角的增加而先增大后减小,并不是随着后缘偏角的增加而增大;增加蒙皮的厚度可以减少柔性蒙皮的最小弹性模量和最小拉伸刚度,但蒙皮的厚度受限于机翼的结构空间;满足Jacobs形变准则的蒙皮最小拉伸刚度随着蒙皮预应变的增加而降低。     

大柔性压电梁振动主动控制实验研究与数值模拟

采用独立模态控制法对含压电片柔性梁进行了振动主动控制实验研究,实现了压电柔性梁前三阶振动模态的独立控制。由施加控制前、后的系统响应对比分析知,实施主动控制后,柔性结构的模态阻尼得到了很大的改善,振动抑制效果十分显著。同时利用Hamilton原理,推导含压电片柔性梁的动力学微分方程,对压电柔性梁前三阶振动主动控制进行了数值仿真,并将仿真结果与实验结果进行对比分析,两者的吻合性良好。研究结果表明,利用压电陶瓷作为驱动元件,采用独立模态控制法实现柔性结构的振动抑制是一种非常有效的振动主动控制方法,在航空航天等领域中具有广阔的应用前景。     

不同结构柔性翼的气动特性风洞试验研究

通过对6种不同结构的柔性翼模型进行的变迎角、变风速风洞试验,研究对比了不同柔度的柔性翼的升阻特性以及对风速变化的响应特性.结果表明,微型飞机采用柔性翼虽然降低了机翼升力的产生,但能够明显改善升阻比;不同柔度的柔性翼会直接影响微型飞机对风速变化的敏感程度,当机翼结构和柔度经过设计后,可以显著提高微型飞机对风速变化的适应能力.试验数据和结论对提高微型飞机的升阻特性以及对风速变化的响应特性具有一定参考价值.     

基于静态输出反馈的大型飞机横航向控制综合

由于广泛采用轻质材料,大型飞机的结构柔性使得控制系统和结构动力学之间存在不可避免的耦合现象,控制器设计必须同时考虑结构柔性对系统反馈的贡献,并满足飞行品质、鲁棒性等目标.提出了一种利用刚体飞行动力学模型和包含弹性模态的高阶模型设计满足多种目标的控制器综合方法,首先由刚体模型设计静态输出反馈参数,满足动态响应、飞行品质和抑制阵风扰动等要求,在此基础上利用已获得的静态反馈参数针对高阶模型设计H_∞回路成形控制器,实现对结构模态的抑制,并满足系统的鲁棒性需求.仿真结果表明:设计方法能够充分利用包含弹性模态的大型飞机飞行动力学模型的特点,满足结构模态抑制和鲁棒稳定裕度等多种需求.      

光纤陀螺测斜仪用加速度计数据采集系统

针对小井眼钻井技术对测井仪器口径的要求,设计了适合小口径测斜仪用的加速度计数据采集系统,采用A/D转换的解决方案,由22位Δ-Σ型AD7716芯片采样模拟信号,并将转换后的结果输入到FPGA,与陀螺和温度数据打包传入DSP,参与导航解算工作。给出了系统的软硬件设计方案和数据采集的软件界面。实验表明,该系统测量精度小于500ug,抗干能力强,满足小口径测斜仪可靠工作的要求。     

A Backstepping Simple Adaptive Control Application to Flexible Space Structures

Although the simple adaptive control (SAC) is widely studied both in theory and application in flexible space structure control and other control problems, it is restricted by the almost strictly positive real (ASPR) conditions. In most practical control problems, the ASPR conditions are not satisfied. Therefore, based on the SAC theory, this paper proposes a backstepping simple adaptive control algorithm which suits the system with arbitrary relative degree with no need of parallel feedforward compensator. The proposed control algorithm consists of decomposition of the arbitrary relative degree system into a known subsystem and an unknown ASPR subsystem which are connected in cascade, design of constant output feedback controller for the known subsystem, and implementation of backstepping method and SAC of the unknown ASPR subsystem. Inheriting the characteristics of the SAC, this method can be adaptive online for the parameter uncertainties. Then, the application of the proposed controller to large flexible space structure with collocated sensors and actuators is studied, and the simulation results validate the proposed controller. It is a new strategy to apply the classical SAC to high relative degree plants.